Google

Basic of Flanges and Flange type..




Flange


                            A flange is a method of connecting pipes, valves, pumps and other equipment to form a piping  system. It also provides easy access for cleaning, inspection or modification. Flanges are usually welded or screwed. Flanged joints are made by bolting together two flanges with a gasket between them to provide a seal.



Types of Flanges:

The most used flange types :
  • Welding Neck Flange
  • Slip On Flange
  • Socket Weld Flange
  • Lap Joint Flange
  • Threaded Flange
  • Blind Flange

Special Flanges
Except the most used standard flanges, there are still a number of special flanges such as:
  • Orifice Flanges
  • Long Welding Neck Flanges
  • Weldo flange / Nipo flange
  • Expander Flange
  • Reducing Flange

 

Materials for Flanges

                                 Pipe flanges are manufactured in all the different materials like stainless steel, cast iron, aluminum, brass, bronze, plastic etc. In addition, flanges, like fittings and pipes, for specific purposes sometimes internally equipped with layers of materials of a completely different quality as the flanges themselves, which are "lined flanges".

                       The material of a flange, is basically set during the choice of the pipe, in most cases, a flange is of the same material as the pipe.


 Flange types
  
Most common flange types





Welding Neck Flange:

                        Welding Neck Flanges are easy to recognize at the long tapered hub, that goes gradually over to the wall thickness from a pipe or fitting.

             The long tapered hub provides an important reinforcement for use in several applications involving high pressure, sub-zero and / or elevated temperatures. The smooth transition from flange thickness to pipe or fitting wall thickness affected by the taper is extremely beneficial, under conditions of repeated bending, caused by line expansion or other variable forces.

                   These flanges are bored to match the inside diameter of the mating pipe or fitting so there will be no restriction of product flow. This prevents turbulence at the joint and reduces erosion. They also provide excellent stress distribution through the tapered hub and are easily radio graphed for flaw detection.

 This flange type will be welded to a pipe or fitting with a single full penetration, V weld .

Details of Welding Neck flange.







Slip On flange

               The calculated strength from a Slip On flange under internal pressure is of the order of two-thirds that of Welding Neck flanges, and their life under fatigue is about one-third that of the latter.

          The connection with the pipe is done with 2 fillet welds, as well at the outside as also at the inside of the flange.

The X measure on the image, are approximately:
Wall thickness of pipe + 3 mm.

    This space is necessary, to do not damage the flange face, during the welding process.

Details of Slip On flange





Socket Weld flange

               Socket Weld flanges were initially developed for use on small-size high pressure piping. Their static strength is equal to Slip On flanges, but their fatigue strength 50% greater than double-welded Slip On flanges.
              The connection with the pipe is done with 1 fillet weld, at the outside of the flange. But before welding, a space must be created between flange or fitting and pipe.
                  The purpose for the bottoming clearance in a Socket Weld is usually to reduce the residual stress at the root of the weld that could occur during solidification of the weld metal. The image shows you the X measure for the expansion gap.

Details of Socket Weld Flange







Lap Joint Flange

               Lap Joint Flanges have all the same common dimensions as any other flange named on this page however it does not have a raised face, they used in conjunction with a "Lap Joint Stub End".

               These flanges are nearly identical to a Slip On flange with the exception of a radius at the intersection of the flange face and the bore to accommodate the flanged portion of the Stub End.

                Their pressure-holding ability is little, if any, better than that of Slip On flanges and the fatigue life for the assembly is only one tenth that of Welding Neck flanges.

                They may be used at all pressures and are available in a full size range. These flanges slip over the pipe, and are not welded or otherwise fastened to it. Bolting pressure is transmitted to the gasket by the pressure of the flange against the back of the pipe lap (Stub End).

Lap Joint flanges have certain special advantages:
  • Freedom to swivel around the pipe facilitates the      lining up of opposing flange bolt holes.
  • Lack of contact with the fluid in the pipe often permits the use of inexpensive carbon steel flanges with corrosion resistant pipe.
  • In systems which erode or corrode quickly, the flanges may be salvaged for re-use.
Details of Lap Joint Flange





Stub End

                 A Stub End always will be used with a Lap Joint flange, as a backing flange.

          This flange connections are applied, in low-pressure and non critical applications, and is a cheap method of flanging.
          In a stainless steel pipe system, for example, a carbon steel flange can be applied, because they are not come in contact with the product in the pipe.

 Lap Joint Flange with a Stub End




Threaded Flange

                     Threaded Flanges are used for special circumstances with their main advantage being that they can be attached to the pipe without welding. Sometimes a seal weld is also used in conjunction with the threaded connection.

                   Although still available in most sizes and pressure ratings, screwed fittings today are used almost exclusively in smaller pipe sizes.

                     A threaded flange or fitting is not suitable for a pipe system with thin wall thickness, because cutting thread on a pipe is not possible. Thus, thicker wall thickness must be chosen...what is thicker ?

Details of Threaded flange



Blind Flange

Blind Flanges are manufactured without a bore and used to blank off the ends of piping, Valves and pressure vessel openings.

From the standpoint of internal pressure and bolt loading, blind flanges, particularly in the larger sizes, are the most highly stressed flange types.

However, most of these stresses are bending types near the center, and since there is no standard inside diameter, these flanges are suitable for higher pressure temperature applications.

Details of Blind flange




SPECIAL TYPES OF FLANGES




Nipoflange




Weldoflange


Elboflange



Swivel ring flanges


Expander flanges




Reducing flanges














If u like this post please like, share and comments. 

Follow Us and Like

youtube.

Website.

Facebook.



Subscribe , Like and follow us get more information.



Thermal Power Tech





Welcome you to online tutorial Thermal Power Tech. This Website create For thermal power plants knowledge. It's a great platform to knowledge who working in thermal power plants. It's very Useful For Boiler operation Engineer(BOE), 1St Class, 2nd Class Attendant, Turbine Engineer, Oilman, Water Chemist and technical students. 

Basic of Flanges and Flange type.. Basic of Flanges and Flange type.. Reviewed by Thermal Power Tech on September 21, 2019 Rating: 5

65 comments:

  1. I agree with a lot of the points you made in this article. If you are looking for the puddle flange, then visit Fastwell. I appreciate the work you have put into this and hope you continue writing on this subject.

    ReplyDelete
  2. Thanks for sharing the best information and suggestions, If you are looking for the best p91 pipe, then  Aesteiron Steels LLP. Highly energetic blog, I’d love to find out some additional information.

    ReplyDelete
  3. Hi there to everyone, the contents present at this web page are actually amazing for people knowledge, well, you can also visit asme b16.9 fittings for more  Rajtilak Metal related information and knowledge. Keep up the good work.

    ReplyDelete
  4. Your contents are completely awesome and share worthy. I really appreciate your efforts that you put on this. Keep sharing. For more Inconel 600 Tube related information visit Tarang Steel

    ReplyDelete
  5. Your blog is awfully appealing. I am contented with your post. I regularly read your blog and its very helpful. If you are looking for the best Stainless Steel 304 Buttweld Fittings, then visit Great steel & metals. Thanks! I enjoyed this blog post.

    ReplyDelete
  6. Hi to every single one, it’s truly a good for me to visit this web page, I love your content, they are very nice and it includes helpful Information. Check out our website ANSI B16.5 Flange for more Metallect Steel Industries. related info! I am truly pleased to read this website posts which carries lots of helpful data, thanks for providing these kinds of statistics.

    ReplyDelete
  7. Hi there to everybody, it’s my first go to see of this web site; this weblog consists of awesome and in fact good stuff for visitors. Hurrah, that’s what I was exploring for, what stuff! Existing here at this blog, thanks admin of this web site. You can also visit Duplex 2205 Pipe for more Oshwin. related information and knowledge.

    ReplyDelete
  8. This article is very informative & helpful for gasket users and ginseal spiral wound gasket manufacturer also.Metal spiral wound gasket is used with the flanges by oil industries to avoid the leakage of flange joints or pipes.it is very useful tools for machinery industries.

    ReplyDelete
  9. Looking for casting parts in automobile ? Then we are the best for you, who suit your expectations. We have huge experience on this field. We are 100% dedicated to find you cheap casting parts in automobile.
    You can buy casting parts in automobile safely here and here are numberius clients buy casting parts in automobile. We are provide only high perfomence machine only with always customers support.
    If you want to know more, Please check out here : casting parts in automobile

    ReplyDelete
  10. Share great information about your blog , Blog really helpful for us . ASTM B164 Monel 400 Bar

    ReplyDelete
  11. I agree with a lot of the points you made in this article. If you are looking for the Forged Globe Valves, then visit Kalpataru.

    ReplyDelete
  12. Hi there to everyone, the contents present at this web page are actually amazing for people knowledge, well, you can also visit SS 304 Sheet for more STANCOR ALLOYS INC related information and knowledge. Keep up the good work.

    ReplyDelete
  13. After going through your contents I realize that this is the best of my knowledge as it provides the best information and suggestions. This is very helpful and share worthy. If you are looking for the best Grade 10.9 Bolts then visit VIHA STEEL & FORGING. Keep sharing more.

    ReplyDelete
  14. Looking for pcb assembly services and manufacture service? Then we are the best for you, who suit your expectations. We have huge experience on this field. We are 100% dedicated to find you cheap pcb assembly services and manufacturing service.
    You can buy pcb assembly services and manufacturing services here and here are numberius clients buy our products. We are provide only high quality pcb assembly services and manufacture for you with always customers support.

    If you want to know more, Please check out here - pcb assembly services for more information.

    ReplyDelete
  15. After going through your contents I realize that this is the best of my knowledge as it provides the best information and suggestions. Stainless Steel 304l Flange

    ReplyDelete
  16. Very efficiently written information. It will be beneficial to anybody who utilizes it, including me. Keep up the good work. For sure i will check out more posts. This site seems to get a good amount of visitors. basic knowledge hub

    ReplyDelete
  17. All information you included on your blog that's really commendable. All things are very useful. I hope you keep sharing your knowledgeable information with all of us. Custom Tubing

    ReplyDelete
  18. After reading the above posts, I got some useful knowledge about flange and its type which is really informative. Thanks for posting it. eaton vfd

    ReplyDelete
  19. Your blog is really very nice informative and thorough. I read the blogs each time they are sent.
    stainless steel pipe fittings manufacturers

    ReplyDelete
  20. Very nice post. I absolutely appreciate this site. Continue the good work!
    Alloy Steel Pipe Suppliers

    ReplyDelete
  21. I am thankful to this blog giving unique and helpful knowledge about this topic.
    Ss Fasteners Manufacturers In India

    ReplyDelete
  22. Your blog is really very nice informative and thorough. I read the blogs each time they are sent.
    stainless steel pipe suppliers

    ReplyDelete
  23. I really like it whenever people come together and share thoughts. Great post, keep it up.
    carbon steel pipe fittings manufacturers

    ReplyDelete
  24. Your blog is awfully appealing. I am contented with your post. I regularly read your blog and its very helpful. C276 Plate

    ReplyDelete
  25. Wonderful Article, which define very interesting information about the topic.Thanks for taking your time to share ss bolts and nuts If you wants more related services then must visit Jignesh Steel.

    ReplyDelete
  26. Very informative article, which you have shared. After reading your article I got very much information and it is very useful for me. You can also visit stainless steel flange bolts for more nickelalloysonline related information and knowledge, I am thankful to you for sharing this article here.


    ReplyDelete
  27. In this post we read useful tips which is effective our thoughts. Understood easily that how it's work step by step Stainless Steel Flanges manufacturer in India If you wants more related services then must Regal Sales Corporation.

    ReplyDelete
  28. You have a genuine capacity to compose a substance that is useful for us. You have shared an amazing post about flange. Much obliged to you for your endeavors in sharing such information with us. heavy duty ball transfer bearing

    ReplyDelete
  29. Very informative content her. determine detailed information for the different types of flanges products with specifications.Amazing way to update the products information.

    ReplyDelete
  30. On the off chance that you are looking for best McAfee specialized help, Our McAfee client care number and locate the best answer for it. thermal scope

    ReplyDelete
  31. I was searching for some welding supplies for my construction project. Then I found the Service Welding Supply website. I purchased all the welding supplies that I required. They provided all the welding supplies at the lowest price. Welding supplies Miami

    ReplyDelete
  32. This is excellent information which is shared by you. This information is meaningful and magnificent for us to increase our knowledge about it. Keep sharing this kind of information. Thank you. spot welding machine

    ReplyDelete
  33. Very helpful information! Please visit our website to know more MLG India

    ReplyDelete
  34. Very helpful information! Please visit our website to know more Newzel Industries

    ReplyDelete
  35. You've written an excellent post, and you've shared it with us about Label Backside Numbering Inspection India. Your article provided me with some unique and useful knowledge. I appreciate you sharing this text with us.

    ReplyDelete
  36. Newzel (https://www.newzelindustries.com/) are on an endeavor to create an impact in the stainless steel industry, and attain collaborative growth with our clients. For the new age of technology and innovation we aim to exemplify the passion in our work and service to our customers.

    ReplyDelete
  37. Newzel ( Newzel ) are on an endeavor to create an impact in the stainless steel industry, and attain collaborative growth with our clients. For the new age of technology and innovation we aim to exemplify the passion in our work and service to our customers.

    ReplyDelete
  38. I agree with a lot of the points you made in this article. If you are looking for the Stainless Steel Flanges manufacturers in india, then visit Ashtapad Overseas. I appreciate the work you have put into this and hope you continue writing on this subject.

    ReplyDelete
  39. What’s up, every time I used to check blog posts here in the early hours in the break of day, for the reason that I enjoy to gain knowledge of more and more. Get more information at Stainless Steel 316 Round Bar. As I am in fact eager of reading this web site’s post to be updated regularly. It includes nice stuff.

    ReplyDelete
  40. Thank you for providing me with such valuable information about shredding machinery. This article provided me with some useful knowledge. Continue to make posts like this.

    ReplyDelete
  41. Amazingly helpful which you have shared here. I am impressed by the details and also it is a significant article for us. Continue imparting this sort of info, Thank you.Steel Pipe Fittings For Sale Online

    ReplyDelete
  42. Thanks for sharing this valuable insights on high-quality materials. We have been the best manufacturers of JIS B 2220 2K and JIS B 2220 40K Components of the best materials. To learn more about it Go over here.

    ReplyDelete
  43. Very Informative blog that help us understand information easily and fast. Keep sharing more information. If you are looking for the best ASTM seamless tube supplier in India do check out our products below:

    https://www.amardeepsteel.com/astm-a210-asme-sa210-tubes.html

    ReplyDelete
  44. I found your blog on Google and read a few of your other posts. Versatile

    ReplyDelete
  45. Very insightful and amazing content. Do check out our website Vintex Steel

    ReplyDelete
  46. Your blog have very good information. I also have some worth information regarding the service. Jade Alloys

    ReplyDelete
  47. Thanks for sharing the best information and suggestions Unifit Flange

    ReplyDelete
  48. Nice reading, I love your content. This is really a fantastic and informative post. Unifit Fasteners

    ReplyDelete
  49. Really appreciate this wonderful as we have seen here. Victor Steel

    ReplyDelete
  50. Flanges are essential components used to connect pipes, valves, pumps, and other equipment in various industries such as oil and gas, chemical, power generation, and water treatment. They are designed to provide a strong, leak-proof connection between two or more piping components.

    ReplyDelete
  51. I've always been curious about flanges and your article provided a comprehensive overview. Thanks for sharing! If you're interested, we have ASTM A106 Pipe products on our site that might catch your eye. 

    ReplyDelete
  52. Flanges can be a complex topic, and your article simplifies it beautifully. Kudos! If you ever need 400 BHN Plates related products, check out what we offer on our website. 

    ReplyDelete
  53. Flanges play a crucial role, and your article explains it well. If you ever need quality ASTM A790 UNS S32205 Pipeproducts, our website is worth a visit. Let us know what you think!

    ReplyDelete
  54. Flanges can be confusing, but your article breaks it down nicely. If you ever need quality flange products, our website has a variety of Stainless Steel Flat Flanges to choose. 

    ReplyDelete
  55. "Thanks for the comprehensive guide on flanges! If you're looking for quality Stainless Steel 316 Foils products or want to learn more, visit our site. We offer a wide range of options to meet your industrial needs." 

    ReplyDelete
  56. "Informative post on flanges! If you're in the market for high-quality Duplex 2507 Platesproducts, check out our site. We offer a diverse range of options to cater to various industrial requirements."

    ReplyDelete
  57. This article on the basics of flanges and flange types is an insightful guide, providing comprehensive information for both beginners and experienced professionals. For top-notch ASTM A790 Duplex S31803 Boiler Pipes, look no further than Shree Ashapura Steel Centre – a trusted manufacturer delivering superior quality and reliability.

    ReplyDelete

Google

Powered by Blogger.